dmesg from the box acting as router
<pre>
[r2-current]% cat /var/run/dmesg.boot 
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #15: Fri Nov 24 13:31:43 EST 2006
mdtancsa@r2-current.sentex.ca:/usr/obj/usr/src/sys/router
ACPI APIC Table: <Nvidia AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2015.01-MHz 686-class CPU)
Origin = "AuthenticAMD"  Id = 0x20fb1  Stepping = 1
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x1<SSE3>
AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow!+,3DNow!>
AMD Features2=0x3<LAHF,CMP>
Cores per package: 2
real memory  = 2147418112 (2047 MB)
avail memory = 2096418816 (1999 MB)
ioapic0: Changing APIC ID to 2
ioapic0 <Version 1.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
atapci0: <nVidia nForce CK804 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce CK804 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xdb002000-0xdb002fff irq 21 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce CK804 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xdb001000-0xdb001fff irq 22 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xa000-0xa0ff mem 0xd8000000-0xd8ffffff,0xda000000-0xda000fff irq 18 at device 8.0 on pci5
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xb000-0xb007 mem 0xdb000000-0xdb000fff irq 23 at device 10.0 on pci0
nve0: Ethernet address 00:13:d4:ae:9b:6b
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:13:d4:ae:9b:6b
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pci4:0:0: bad VPD cksum, remain 9
bge0: <Broadcom BCM5750 A1, ASIC rev. 0x4001> mem 0xd7000000-0xd700ffff irq 17 at device 0.0 on pci4
miibus1: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: Ethernet address: 00:10:18:14:15:12
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3:0:0: bad VPD cksum, remain 9
bge1: <Broadcom BCM5750 A1, ASIC rev. 0x4001> mem 0xd5000000-0xd500ffff irq 16 at device 0.0 on pci3
miibus2: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus2
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: Ethernet address: 00:10:18:14:27:d5
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pci2:0:0: bad VPD cksum, remain 9
bge2: <Broadcom BCM5750 A1, ASIC rev. 0x4001> mem 0xd3000000-0xd300ffff irq 19 at device 0.0 on pci2
miibus3: <MII bus> on bge2
brgphy2: <BCM5750 10/100/1000baseTX PHY> on miibus3
brgphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge2: Ethernet address: 00:10:18:14:38:d2
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x9000-0x901f mem 0xd1020000-0xd103ffff,0xd1000000-0xd101ffff irq 18 at device 0.0 on pci1
em0: Ethernet address: 00:15:17:0b:70:98
em0: [FAST]
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x9400-0x941f mem 0xd1040000-0xd105ffff,0xd1060000-0xd107ffff irq 19 at device 0.1 on pci1
em1: Ethernet address: 00:15:17:0b:70:99
em1: [FAST]
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
sio0: [FAST]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc97ff,0xcc000-0xcdfff,0xce000-0xcffff,0xd0000-0xd1fff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2015011147 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 114473MB <Seagate ST3120026A 3.06> at ata0-master UDMA100
ad2: 38166MB <Seagate ST340014A 3.06> at ata1-master UDMA100
acd0: DVDR <AOPEN 8X8 DVD Dual AAN/1.4A> at ata1-slave UDMA33
Trying to mount root from ufs:/dev/ad0s2a
</pre>